On this page
- How do you compare the packages fairly?
- Ground turkey vs ground beef macros: what does the lean label mean?
- Ground turkey vs ground beef protein: what changes after broiling?
- Why do cooked yield and draining change the comparison?
- How do you substitute turkey in the same burger recipe?
- Which ground meat should you buy?
- What changes about safe cooking when you swap?

How do you compare the packages fairly?
Ground turkey vs ground beef is a fair comparison when you match the lean category and the state: raw against raw, or cooked against cooked. The USDA FoodData Central SR Legacy records used here are from April 2018, checked November 2026. They describe reference foods, not an analysis of the package in your cart.
You can use this shopping sequence: match the lean-to-fat description, check whether the panel describes the meat as sold or prepared, and compare equal serving weights. Then read the protein, total fat and calories. The FDA’s nutrition-label guide, accessed November 2026, explains that the nutrient amounts apply to the stated serving and that serving size is not a recommendation for how much to eat.
If the packages have different lean percentages, you can still choose between those particular products. Keep the conclusion specific to the packages. A comparison of a leaner turkey blend with a fattier beef blend cannot isolate a difference between animals.
For the broader food choice, use the high-protein foods chart. The turkey protein guide covers breast, dark meat and other turkey products; the steak and ground beef protein guide covers cuts and beef blends. Here, the decision is how to swap matching ground meats.
Ground turkey vs ground beef macros: what does the lean label mean?
The lean label and the protein number answer different questions. “Macros” means macronutrients: protein, fat and carbohydrate. The USDA SR Legacy (2018) records below report lean category and protein content separately; the lean percentage is not the percentage of protein.
The matched category below is 93% lean and 7% fat in USDA’s 2018 descriptions. Each portion is 4 oz (113 g) raw. A kcal is the food-label calorie. The table separates the category name from the actual nutrient values recorded in the database.
| Raw meat, same nominal lean category | Protein | Total fat | Calories |
|---|---|---|---|
| Turkey, 93% lean / 7% fat | 21 g | 9.4 g | 170 kcal |
| Beef, 93% lean / 7% fat | 24 g | 7.9 g | 172 kcal |
The turkey record needs a qualification: USDA’s 2018 entry is named 93% lean / 7% fat but lists 8.34 g total fat per 3.5 oz (100 g). The beef record lists 7 g fat at that same weight. These are matched nominal categories, not identical measured fat contents. The database description does not guarantee the nutrient composition of every retail package.
In practice, use the category to narrow your choice and the package panel to finish it. Do not replace a package’s stated fat grams with a calculation from its front-label lean percentage. The guide to reading a nutrition label for protein explains serving weights and nutrient grams in more detail.
Ground turkey vs ground beef protein: what changes after broiling?
Broiled turkey and beef patties in the matching lean category provide almost the same protein at an equal cooked weight in USDA SR Legacy (2018). Matching both the patty form and the broiling method makes this a more useful comparison than pairing a turkey crumble with a beef burger.
| Broiled patty, same nominal lean category | Protein | Total fat | Calories |
|---|---|---|---|
| Turkey, 93% lean / 7% fat | 22 g | 9.7 g | 176 kcal |
| Beef, 93% lean / 7% fat | 22 g | 7.6 g | 164 kcal |
The raw and cooked tables do not follow the same pieces of meat through your kitchen. They are separate database records. You cannot subtract their portion values to calculate how much protein or fat your own patty lost.
For an equal-protein comparison, the USDA 2018 broiled-patty values give about 30 g protein in 4.1 oz (116 g) turkey, with 240 kcal. Beef reaches about 30 g in 4.0 oz (114 g), with 220 kcal. These are calculated meat-only portions, not required serving sizes. The portion difference is small enough that preference and the rest of the meal can reasonably guide your choice.
Why do cooked yield and draining change the comparison?
Cooked yield is the edible cooked weight left from the raw meat you started with. USDA’s Table of Cooking Yields for Meat and Poultry (2014) measures weight changes from moisture and fat loss under specified cooking protocols. A smaller cooked weight is not evidence that all the missing weight was fat.
USDA’s cooking-yield documentation (2014) distinguishes moisture loss from fat loss. In practice, losing water can concentrate protein into a smaller cooked portion, while draining can remove rendered fat along with liquid. Equal cooked portions can therefore tell a different story from equal raw portions. Neither comparison is wrong; they answer different questions.
The USDA 2018 turkey crumble record describes pan-broiling, while the corresponding beef crumble record describes pan-browning. Those method names do not establish identical cooking and draining conditions. Those records are deliberately excluded from the head-to-head tables here. For a crumble recipe, choose a cooked entry that describes your own preparation as closely as possible.
You can weigh the edible meat after the draining step you actually use, before adding sauce or sides. Keep the draining method consistent when comparing batches. The scale tells you the weight left to eat; it cannot tell you the exact nutrients in discarded juices. A matched cooked reference is still an estimate.
How do you substitute turkey in the same burger recipe?
A burger substitution works best with equal raw starting weights and a measured cooked yield for each batch. You can keep the buns and toppings the same, broil each meat safely, and weigh the edible patties before assembling the burgers.
For this worked example, start each batch with 1 lb (454 g) raw meat from the matching lean category, form four patties, and add no oil or other ingredients to the meat. After cooking, weigh all edible patties together on a tared plate. Divide that measured weight by four to find the cooked meat per burger.
The example below uses assumed scale readings, not kitchen-tested results: suppose the turkey batch weighs 12.0 oz (340 g) cooked and the beef batch weighs 11.4 oz (324 g). Replace those inputs with your actual measured yields. These numbers are arithmetic inputs, not predicted shrinkage rates or evidence that one meat always yields more.
| Example meat-only burger | Cooked portion | Estimated protein | Estimated calories |
|---|---|---|---|
| Turkey: assumed batch yield divided by four | 3 oz (85 g) | 22 g | 176 kcal |
| Beef: assumed batch yield divided by four | 2.9 oz (81 g) | 21 g | 156 kcal |
The recipe example answers “what is in one burger from this batch?” The earlier cooked table answers “what is in the same weight of meat?” Unequal cooked portions explain why the answers differ. Do not copy the example’s finished weights into your log unless your scale actually gives those readings.
For a complete burger, you can add the bun and toppings separately using their labels or matching food records. If you add binders or seasonings to the patties, include those ingredients in the batch calculation. If you mix the meat into a sauce, weigh the whole finished recipe and apportion its estimated nutrients by the fraction you eat. For whole sandwiches with a bun, see protein in a hamburger, which compares complete burgers with cooked patties. The guide to protein in meatballs covers portions and meat types.
Which ground meat should you buy?
Your package and recipe are better decision tools than the animal name alone. In the USDA 2018 records above, raw calories are similar in the matching category, and cooked patty protein is nearly equal. That supports treating the two as practical protein substitutes, with the label and preparation deciding the details.
- For protein: compare the amount in your usual portion before changing the rest of the meal.
- For a fat limit: compare total fat or saturated fat on equal-weight package servings, according to the nutrient your care plan names. Total fat and saturated fat are different label lines.
- For cost: compare the shelf price for equal package weights. If you measure yields, you can also compare the cost of an edible cooked portion. No local price winner is assumed here.
- For a familiar recipe: keep the additions consistent for the first swap. Adjust seasoning to your preference, then include any additions when estimating the finished meal.
If you have kidney disease, are pregnant, are under 18 or follow a medically managed diet, talk to your care team about protein targets and food choices. A meat comparison does not replace an individual plan. If you have a history of disordered eating, skip calorie counting and talk to a clinician; whether calorie counting is healthy and tracking protein without counting calories discuss other approaches.
What changes about safe cooking when you swap?
Ground turkey and ground beef have different safe minimum internal temperatures. FoodSafety.gov’s chart, reviewed November 21, 2024, specifies 165°F (74°C) for ground poultry and 160°F (71°C) for ground meat such as beef. Use a food thermometer; do not carry over a beef burger’s cooking time as proof that a turkey burger is safe.
For your next shop, compare matching lean categories and serving weights. For your next batch, record the raw starting weight and the cooked edible yield, then choose the matching food entry. Use the protein label-reading guide to make that final package comparison.
Sources
- USDA FoodData Central. SR Legacy, final release April 2018, accessed November 11, 2026. Turkey, ground, 93% lean, 7% fat, raw (FDC 172850); beef, ground, 93% lean meat / 7% fat, raw (173110); turkey patties, broiled (174492); beef patty, cooked, broiled (174752); turkey pan-broiled crumbles (172851); beef crumbles, cooked, pan-browned (174755). All records refer to the same nominal lean category. USDA FoodData Central
- USDA FoodData Central. Data Type Documentation. Accessed November 11, 2026. USDA data documentation
- U.S. Food and Drug Administration. How to Understand and Use the Nutrition Facts Label. Accessed November 11, 2026. FDA label guide
- USDA Agricultural Research Service. USDA Table of Cooking Yields for Meat and Poultry, Release 2 (2014). Catalog record updated November 30, 2023; accessed November 11, 2026. USDA cooking-yield dataset description
- FoodSafety.gov. Cook to a Safe Minimum Internal Temperature. Reviewed November 21, 2024. Safe minimum internal temperatures
This article is general information, not medical advice. If you have a health condition, are pregnant, or follow a diet set by your doctor, talk to them or a registered dietitian before changing how you eat.


